Free ground shipping to the 48 contiguous United States

Tractor Protection System Kit for Dump Trucks with a PP-1 Dash Valve, Includes Gladhands and Tubing

Part Number:322-PP7TPDTKIT
Ratings Snapshot
4.3
out of 5
5 (1)
4 (2)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%
$536.86 USD
Tractor Protection System Kit for Dump Trucks with a PP-1 Dash Valve, Includes Gladhands and Tubing
Processing...
Qty in Stock: Out of Stock
Quantity in Stock reflects available inventory as of 5:00 AM CST.

Product Details


Adding trailer air brakes to a dump truck

We've created this kit for people with air brake dump trucks that aren't already set up to pull air brake trailers. Your truck should have a PP-1 style dash valve in order to use this kit. You can tell if you have a PP-1 dash valve by the large chrome nut that holds it in the dash and the pin that holds the button onto the shaft. You need a different kit if you have a PP-DC style dash valve where the button is threaded onto the valve. See the MV3TPKIT below for that kit.

We included gladhands that can be bolted to the hitch plate on the rear of a dump truck. They will swing against the plate when not in use, so they'll be out of the way when you're dumping a load. These gladhands also seal themselves off when they swing closed to prevent contaminants from entering the air lines.

Easy Installation

Our tractor protection system kits have been designed to allow for the easiest installation possible and include comprehensive instructions. You'll also have access to our unmatched expert tech support during installation!

Special Notes
none
Product Description
Manufacturer: AnythingTruck.com
Part Number: PP7TPDTKIT
Use this kit to add the ability to pull an air brake trailer to a dump truck
This kit is meant for trucks with an existing PP-1 style dash valve
Includes a trailer dash valve, tractor protection valve, inline quick release valves, swing-away gladhands, nylon air tubing, push-to-connect fittings, zip ties, instructions, and tech support
This kit does not include the fittings required to connect to the truck's foot valve. Contact us for help if you need those fittings.
3
Ratings Snapshot
4.3
out of 5
5 (1)
4 (2)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%
4.3
out of 5
5 (1)
4 (2)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%
Good
4 out of 5
Andy
Location: Pa
Date: February 23, 2024
Good kit. Would have preferred regular fittings instead of push locks, but overall everything worked well.
Verified Buyer Recommended
Trailer air brake kit
5 out of 5
Wesley
Location: Boone NC
Date: August 13, 2023
Everything worked as it should very satisfied
Verified Buyer Recommended
First time purchase
4 out of 5
John
Location: VT
Date: Apr45l 5, 2019
The kit worked well, the air fitting quality was not so good. Had to replace 3 fittings. They leaked. The 2 plastic /brass and 1 brass had to be replaced. Also the fittings supplied didn't match all the ports on the tractor protection valve. Had to scrabble over the weekend to find fittings to work. I did have some fittings left over, since they wouldn't fit the ports, either to big or to small. I installed on Sunday, the truck went out on Monday morning.
Verified Buyer Recommended