SAF Holland RK-NT-ILS-S No-Tilt ILS Slider Retrofit Kit

Part Number:370-RKNTILSS
Not Yet Rated | Write the First Review
$875.74 USD
SAF Holland RK-NT-ILS-S No-Tilt ILS Slider Retrofit Kit
Qty in Stock: 6
Add'l Qty (1-4 days): 2
Quantity in Stock reflects available inventory as of 5:00 AM CST.

Product Details

Are you pulling a dump trailer and need a no-tilt fifth wheel? Here's what you're going to need:

  1. Holland XA-351-A1-06-L-P ILS No-Tilt Top Plate
  2. This Holland RK-NT-ILS-S ILS No-Tilt Slider Retrofit Kit
  3. Holland Holland RK-10689-3 ILS 9" Slider Bracket Kit
  4. Holland RK-10606-1 ILS Slider Base Rebuild Kit
  5. Holland ILS Slider Base (XA-J24, XA-J36, or XA-J48)
  6. Slider Base Mounting Angles

You may or may not have some of these pieces to the puzzle already. You'll only need the XA-351-A1-06-L-P top plate and RK-NT-ILS-S ILS No-Tilt Slider Retrofit Kit if you already have a Holland ILS sliding fifth wheel with 9" slider brackets.

Sorry, there is no easy weld-on kit anymore. Holland doesn't want anyone welding on fifth wheels.

Special Notes
Requires 9" ILS Slider Bracket Kit (See below)
Product Description
Manufacturer: SAF Holland
Part Number: RK-NT-ILS-S
Condition: New
No-Tilt ILS Slider Retrofit Kit
Includes no-tilt shaft with handle, LH & RH no-tilt brackets, no-tilt slider plate, stop blocks, 1/4" lock pin with lanyard, and required hardware

A cross reference listing means that this item should be a suitable replacement for the part numbers listed. You should check the description to be sure it will work in your application.

Be the first to rate this item!

Write Review