FlexFab 5526 series silicone heater hose is sold by the foot. Buy the 250' roll, and you'll receive a bulk
FlexFab does not guarantee continuous lengths on their rolls, so we cannot guarantee continuous lengths on longer orders.
With 1-ply of reinforcement, this hose meets or exceeds the operating requirements of SAE J20 R3 Class A and TMC RP303B Class I Grade II.
- Special Notes
- Product Description
- Manufacturer: FlexFab
- Part Number: 5526-075
- Silicone Heater Hose
- Inside Diameter: 0.75"
- Outside Diameter: 1.08"
- Wall Thickness: 0.14/0.17"
- Minimum Bend Radius: 3.75"
- Actual Burst Pressure: 300 PSI
- Burst Pressure: 200 PSI (SAE J20 R3)
- Burst Pressure: 125 PSI (TMC)
- Temperature Range: -65°F (-54°C) to +350°F (+177°C)
- Use clamp 2582-0010
Cross References: 5526-075, 5526075, 292-5526075, 5526-075x25, 5526-075x50, 5526-075x250,
A cross reference listing means that this item should be a suitable replacement for the part numbers listed. You should check the description to be sure it will work in your application.
Be the first to rate this item!