Bendix K095876 MV-3 Control Module, 1/4"-20 Holes, Includes Fitting for Aux Port (Special Order) Part Number: 060-K095876

Not Yet Rated | Write the First Review

This is a special order item with an estimated lead time of 2-3 weeks before it ships, and we'll contact you with a verified lead time after you place an order.

Please call, email, or chat for a definite lead time if you're in a hurry.

Important Note:

The Bendix K095876 dash valve is the same as Bendix 800530. The only difference is that the K095876 includes a fitting for the auxiliary port. It is less expensive to use the 800530, and buy your fitting separately, if needed. See the bottom of this page for the 800530.

Special Notes

none

Product Description

Manufacturer: Bendix

Part Number K095876

Condition: New

Bendix MV-3 dash valve kit

Supply Ports: 1/4" NPT

Delivery Ports: 1/4" NPT

Exhaust Port: 1/4" NPT

Aux Port: 1/8" NPT

1/4"-20 threaded mounting holes

Replaces obsolete P/N 101890 MV-2 dash valve

Includes valve, auxiliary port fitting, and installation instructions

The Bendix MV-3 Dash Control Module is a dual-button, push-pull valve that controls the tractor and trailer parking brake circuits from a single dash-mounted assembly. It consolidates tractor protection, trailer supply, and system park functions into one compact unit, replacing any existing two- or three-valve push-pull system with reduced plumbing complexity.

The MV-3 uses an integrated dual-circuit supply check valve to manage both primary and secondary reservoir connections, providing automatic trailer brake application if supply pressure drops to approximately 20-45 PSI, with a non-override trip piston activating at 20 PSI. The non-metallic, non-corrosive valve body has all air connections at the rear, with an optional auxiliary port available on select configurations.

Cross References: K095876, 5005087, 101890, 3918398, 5005069, 800530
A cross reference listing means that this item should be a suitable replacement for the part numbers listed. You should check the description to be sure it will work in your application.

Instructions for changing from a Bendix MV-2 to a Bendix MV-3 (.pdf)