Bendix 801360 MV-3 Dash Valve, 3/8" PTC 90 Degree Elbows, Unthreaded Mounting Holes Part Number: 060-801360

Not Yet Rated | Write the First Review

This MV‑3 variant (Bendix 801360) features factory‑installed 3/8" push‑to‑connect 90° composite elbows on all supply, delivery, and exhaust ports. It uses unthreaded 0.275" mounting holes for through‑bolt installation and is supplied as a complete MV‑3 dash valve assembly.

Special Notes

none

Product Description

Manufacturer: Bendix

Part Number: 801360

Condition: New

Supply 11 Port: 3/8" PTC (90° extended elbow, composite, green cap)

Supply 12 Port: 3/8" PTC (90° elbow, composite, red cap)

Delivery 21 Port: 3/8" PTC (90° elbow, composite, orange cap)

Delivery 22 Port: 3/8" PTC (90° elbow, composite, black cap)

Exhaust Port: 3/8" PTC (90° extended elbow, composite, blue cap)

Auxiliary Port: None

Mounting Holes: Ø0.275" unthreaded (4x)

Tractor Trip Pressure: 30 ± 10 PSI

Trailer Trip Pressure: 35 ± 10 PSI

Trailer Override Pressure: 25 ± 5 PSI

Button(s) Included: Yes

The Bendix MV-3 Dash Control Module is a dual-button, push-pull valve that controls the tractor and trailer parking brake circuits from a single dash-mounted assembly. It consolidates tractor protection, trailer supply, and system park functions into one compact unit, replacing any existing two- or three-valve push-pull system with reduced plumbing complexity.

The MV-3 uses an integrated dual-circuit supply check valve to manage both primary and secondary reservoir connections, providing automatic trailer brake application if supply pressure drops to approximately 20-45 PSI, with a non-override trip piston activating at 20 PSI. The non-metallic, non-corrosive valve body has all air connections at the rear, with an optional auxiliary port available on select configurations.

Cross References: 801360, 060-801360, BW801360, 745-801360, BEN801360, BAN801360, ZAC801360, S-23997, S23997, 801360BXW, 5009234, 5010921
A cross reference listing means that this item should be a suitable replacement for the part numbers listed. You should check the description to be sure it will work in your application.