Bendix 287417X Remanufactured PP‑1 Push‑Pull Valve, 30 PSI Automatic Release, 1/4" NPT Delivery Part Number: 061-OR287417X

Not Yet Rated | Write the First Review

The Bendix PP‑1 push‑pull valve (287417X) is a remanufactured, pressure‑sensitive control valve with a 30 PSI automatic release setting. This variant features 1/8" NPT supply and exhaust ports and larger 1/4" NPT delivery ports. Commonly used for parking and emergency brake control, this unit does not include a button or mounting nut.

Special Notes

Button and mounting nut are not furnished with this valve.

Product Description

Manufacturer: Bendix

Part Number: 287417X

Condition: Remanufactured

Valve Type: PP‑1 Push‑Pull Control Valve

Automatic Release Pressure: 30 PSI

Supply Port: 1/8" NPT

Delivery Ports: 1/4" NPT (2)

Exhaust Port: 1/8" NPT

Plunger Diameter: 0.374"

Plunger/Button Height: 1.16"

Shaft Size: 3/8"

Button Included: No

Mounting Nut Included: No

Dial Included: No

Rubber Boot Included: No

Mounting Thread: 7/8‑20 UNEF‑2A

The Bendix PP‑1 valve is a manually operated, push‑pull on/off air control valve with an exhaust function. It is pressure‑sensitive and automatically returns to the exhaust (button out) position when supply pressure falls below its calibrated minimum. When pressure is above the required threshold, the valve may be manually operated to either position. PP‑1 valves are commonly used for parking and emergency brake control and were also used with TP‑2 tractor protection valves in pre‑FMVSS‑121 single‑circuit tractor systems.

Cross References: 287417, R955287417, RKN20021, 109221, 287417N, 109221, 287600, 340107, KN20021, 1676738C1, 16963141C1, 1693142C1, ZAC287417, LPP5615, S-8898, 034014, V1092915
A cross reference listing means that this item should be a suitable replacement for the part numbers listed. You should check the description to be sure it will work in your application.