Bendix 109617X SR-5 Trailer Spring Brake Valve, 1/2" NPT Reservoir Part Number: 061-OR109617X

Not Yet Rated | Write the First Review

Special Notes

The SR-5 is almost identical in appearance to the SR-2. The distinguishing characteristic of the SR-5 is a hole drilled into the flat surface between the pressure protection valve and the body.

Product Description

Manufacturer: Bendix

Part Number: 109617X

Condition: Remanufactured

Reservoir Nipple: 1/2" NPT

With anti-compounding

The SR-5 is a trailer spring brake control valve. It mounts to a reservoir on the trailer and, like the SR-2 & 4, it controls the trailer spring brakes. The SR-5 is similar to the SR-2 and SR-4 but it allows for simpler trailer system plumbing while complying with the latest version of FMVSS 121 (Docket 90-3, Notice 4). However, unlike the SR-2 and SR-4, the SR-5 controls trailer spring brake release using trailer Supply Line pressure. Because dedicated or isolated reservoir pressure is no longer required by law for spring brake release, the SR-5 system needs only a one reservoir for service volume on single axle trailers. Two reservoirs are generally needed for 121 service volume requirements on tandem units. An integral anti-compound feature is part of the SR-5.

Older trailers using the SR-4 can easily be upgraded to the SR-5 with a minimum of repiping.

Cross References: 109617, KN26120, 65439, 065439
A cross reference listing means that this item should be a suitable replacement for the part numbers listed. You should check the description to be sure it will work in your application.