Bendix K148719 MV‑3 Dash Valve, 3/8" PTC Ports, M6 Mounting, No Buttons Part Number: 060-K148719

Not Yet Rated | Write the First Review

This MV‑3 variant (Bendix K148719) features 3/8" push‑to‑connect supply, delivery, and exhaust ports along with an uncommon 5‑bolt M6 × 1‑6H mounting pattern. It is supplied without buttons and includes standard MV‑3 trip pressures and temperature ratings.

Special Notes

Exhaust port must vent to atmosphere – do not pressurize

Product Description

Manufacturer: Bendix

Part Number: K148719

Condition: Service New

Supply 11 Port: 3/8" PTC (green cap)

Supply 12 Port: 3/8" PTC (red cap)

Delivery 21 Port: 3/8" PTC (brown cap)

Delivery 22 Port: 3/8" PTC (orange cap)

Exhaust Port: 3/8" PTC

Auxiliary Port: None

Mounting: M6 × 1‑6H threaded (5x)

Tractor Trip Pressure: 30 ± 10 PSI

Trailer Trip Pressure: 35 ± 10 PSI

Trailer Override Pressure: 25 ± 5 PSI

Operating Temperature: -40°F to 200°F (-40°C to 93°C)

Button(s) Included: No

The Bendix® MV‑3® Dash Control Module is a dual‑button, push‑pull valve used to control the tractor and trailer parking brake circuits from a single dash‑mounted unit. According to Bendix, it "duplicates the functions of any existing two‑ or three‑valve push‑pull system and has the advantages of reduced plumbing."

The MV‑3 combines tractor protection, trailer supply, and system park functions into one compact assembly, using a dual‑circuit supply check valve to manage both primary and secondary reservoirs. All air connections are located at the rear of the valve body, with an optional auxiliary port available on certain models.

Cross References: K148719, 060-K148719
A cross reference listing means that this item should be a suitable replacement for the part numbers listed. You should check the description to be sure it will work in your application.