Bendix 801558 WS-24 ABS Wheel Speed Sensor, 90-Degree, 37.4" Harness, Metri-Pack GT 150, w/Sleeve Part Number: 060-801558

1

| Write a Review

Ratings Snapshot

5.0

out of 5

5 (1)

4 (0)

3 (0)

2 (0)

1 (0)

Would recommend this product.

100%

The Bendix 801558 is a WS-24 antilock brake wheel speed sensor with a 90-degree body and Metri-Pack GT 150 Series 2-way sealed female connector. The WS-24 is an electromagnetic sensor that works with an exciter ring to generate an AC signal for the ABS controller. Sensor resistance at room temperature is 1,500-2,000 ohms. Sensor body outer diameter is 0.627". Maximum sensor-to-exciter gap is 0.015". IPX9K ingress protection rated. Wire protection sleeve, clamping sleeve, and grease included. Note: WS-24 sensors require clamping sleeve p/n 5012878 — do not use previous sleeve p/n 5006849.

Product Description

Manufacturer: Bendix

Part Number: 801558

Series: WS-24

Function: ABS Wheel Speed Sensor

Body Style: 90-Degree

Connector: Metri-Pack GT 150 Series 2-Way Sealed (Female)

Harness Length: 37.4" (949mm)

Sensor Resistance: 1,500-2,000 Ohms (room temperature)

Sensor Body OD: 0.627"

Max Sensor-to-Exciter Gap: 0.015"

Ingress Protection: IPX9K

Max Operating Temperature: 320°F (160°C)

Min Operating Temperature: -40°F (-40°C)

Includes: Wire Protection Sleeve, Clamping Sleeve (p/n 5012878), Grease

Compatible With: All Previous Bendix WS Series Wheel Speed Sensors

Cross References: 801558, 060-801558, 5009126, 5010647, 5012276, 801096, 801252, BW 801558, BW801558, 745-801558, TWDBEN801558, BX801558, ZAC801558, 20784541, K028565
A cross reference listing means that this item should be a suitable replacement for the part numbers listed. You should check the description to be sure it will work in your application.