Roll-Up Tonneau Covers |
This style of tonneau cover has a clamp-on installation for most models of trucks.
The main feature differences between this and other tonneau covers is that the tarp supports are not bowed and they
roll up with the cover fabric. You have no loose parts lying around when your tonneau cover is rolled up. |

TekStyle Profile Roll-up Tonneau Covers
|
Design Auto TekStyle Profile
- Unique Roll-Up Design - The Profile clamps on top of the truck bed rails instead of inside the bed.
This allows more interior width.
- Easiest Storage - Profile does away with the usual snap buckles behind the cab. Instead, the tarp
is secured with a bungee strap that you simply pull over the cover and hook on the tab provided in the corner.
- Simple Tightening Levers - The cover is tightened at the rear with the tensioning levers on each side.
It's one simple motion to secure the cover and acheive the proper tension.
Unfortunately, Design Automotive has gone out of business.
Now is your chance to get a top-quality TekStyle Profile tonneau cover at cheap import prices. Check it out.
Supplies are limited.
|

Extang Express Roll-Up Tonneau Covers
|
Extang Express
- Express Means Fast - Fast install, fast roll-up, and even fast removal.
- Full Access To Bed - The Express cover has a unique clamp design. They are hidden away under the rail. You can
barely even see them once the cover is installed.
- Quick Release - This cover has quick release levers at the front and rear, so the cover can be completely
removed from the truck while the rails stay in place. This is a very handy feature if you're hauling
a cargo that may damage the cover.
- Spring Loaded Tension - The rear bar latches into spring loaded slides, so the cover is always tight.
|

Extang RT Roll-Up Tonneau Covers
|
Extang RT
- Super Low Profile - It'd be hard to have a lower profile cover than the Extang RT. The rails are flat,
so the cover is almost sitting right on the bed rails.
- Fast and Secure Install - Extang's TuffKlamps allow for a no-drill installatino. As a bonus, a heavy-duty
nautical style tie down is included on each clamp.
- Easy Open - The cover can be opened by simply opening the tailgate and release the one-finger latch.
- Dual Sealing - The WeatherTuff dual sealing system is made to withstand high temps and is UV resistant.
|

TruXedo Lo Profile® Roll-Up Tonneau Covers
|
Truxedo Lo Profile
- Low Profile Design - The Lo Pro frame is designed with lower angles, so the cover is less than an inch
above the truck bed.
- Unique Tension System - The Truxedo Lo Pro has spring loaded tensioners at the front of the truck bed.
The springs are designed to keep the tarp tight as the weather changes, so no manual adjustments are necessary.
- Secure Latch Mechanism - The Lo Pro has a very solid latch mechanism, so you can be sure the cover is
really latched closed. There's no guessing here.
|

TruXedo® Roll-Up Tonneau Covers
|
Truxedo
- Original Design - This is the original Truxedo.
- Vertical Side Rails - The side rails have 90° angles, so the cover has a squared-off, boxy look.
- Unique Tension System - The Truxedo has spring loaded tensioners at the front of the truck bed.
The springs are designed to automatically keep the tarp tight.
- No-Drill Install - The Truxedo clamps on the side rails of the truck bed, so you have no drilling to do.
|

Access Roll-Up Tonneau Covers
|
Access
- Auto Latching - The rear bar is automatically secured when closed.
- Slide-Locks - Sliding locks are provided , so you can lock the cover when needed.
- Element Seal - The Access cover now includes an additional Element Seal for the front rail of the truck bed.
- Easy Tension Adjustment - Access includes the XT-Dial tension adjusters, so you can easily adjust the
tension of your cover.
- No-Drill Install - The Access cover clamps to the inside edge of your truck bed's side rails.
|

Lorado Roll-Up Tonneau Covers
|
Lorado
- Easy Tensioning - The XT-Dial adjusters at the front of the bed allow you to easily make changes in cover tension.
- Low Profile Design - The Lorado is built by Agri-Cover, maker of the Access Cover, and is designed to be
a lower profile alternative.
- Reflex Latch - Close the rear bar and the cover is latched securely. No muss, no fuss.
- No-Drill Install - The Access cover clamps to the inside edge of your truck bed's side rails.
|
Folding Tonneau Covers |
Folding tonneau covers offer quick installation and easy access to the
truck bed by allowing you to fold back the cover rather than roll it up. There are no extra parts lying
around when the tonneau cover is folded to the back of the cab. |

Extang Trifecta Folding Tonneau Covers
|
Extang Trifecta
- Tri-Fold Vinyl Cover - Extang Trifecta is a soft cover that folds.
- Easy Installation - Trifecta arrives at your door fully assembled. Set it on the truck
and tighten the clamps. No tools required.
- Speedy Opening Action - The rear clamps act as spring loaded levers, so you can have the cover folded in seconds.
- MaxHinges - The super strong hinges are built to last.
- Convenient Storage - When folded, the cover is secured with heavy-duty Hold-Tite snap buckles.
They're quick and easy to use.
|
Lifting Tonneau Covers |
These tonneau covers have a hinge system that allows the soft tonneau cover to
lift like a hard tonneau, and you still have the ability to roll the cover up like any other soft cover.
When rolled up, the fabric support bows are stored loosely in the truck bed or left at home. |

Extang FullTilt Lifting Tonneau Covers
|
Extang FullTilt
- Hinged Vinyl Tonneau - FullTilt is a soft vinyl cover that lifts life a hard fiberglass cover.
- No Drilling - The hinge rail is easily clamped on to your truck.
- Full Access In Moments - With FullTilt, you can lift, unsnap, or completely remove the cover in seconds.
- Available In Snapless - Don't like snaps? No problem. FullTilt can be purchased with a smooth-edge
snapless tarp, or you can stick with the classic snap cover.
|
Classic Tonneau Covers |
These are covers that use an aluminum frame that is
clamped to the top of the truck's bed rails. The fabric is then snapped onto the tonneau cover frame.
When rolled up, the fabric support bows are stored loosely in the truck bed or left at home. |

Extang BlackMax Snap Tonneau Covers
|
Extang BlackMax
- Black To The Max - All black frame and tarp
- No-Drill Installation - BlackMax clamps to your truck bed.
- All Weather Adjustability - Snaps and support bows can be adjusted for changes in temperature.
- Easy, LeverLock Corners - The rear rail is easily removed when you want full access to the truck bed.
- Snaps Stay On Rails - A simple feature, but one most manufacturers forget. BlackMax includes
a SnapStopper on the rails for times when you're driving with the rear rail removed.
- Full Access To Truck Bed - BlackMax has snaps on all four rails, so you can open the tarp anywhere you want.
|

TekStyle Snap Tonneau Covers
|
Design Auto TekStyle
- No-Drill Installation - The TekStyle frame clamps to your truck bed without damage to the finish.
- Easy And Secure Bows - Tekstyle features patented trigger-lock bows that are easy to install and won't fall out.
- Tough Snaps - Your cover will include marine grade stainless steel snaps that will last the life of the cover.
- Easy Access - The truck's tailgate will open with TekStyle in place.
Unfortunately, Design Automotive has gone out of business.
Now is your chance to get a top-quality TekStyle tonneau cover at cheap import prices. Check it out.
Supplies are limited.
|