LED Warning Lights / LED Beacons
Our Pro LED warning lights are much more durable than incandescent bulbs and flash tubes because there is no filament to burn out or break. You will save money over standard strobe lights since you will never have to buy another flash tube. The fact that there are no flash tubes or moving parts also makes our lights perfect for use in high vibration environments.
ACL Series Low Profile LED Light Bar |
|
| Pro LED Low Profile Light Bar Class 1 Brightness 24" L x 3-3/4" W x 1-1/2" H This light bar includes a control box with 8 functions. It operates at 12 volts DC. $390.00 |
|
| Pro LED Low Profile Light Bar Class 1 Brightness 45" L x 3-3/4" W x 1-1/2" H This light bar includes a control box with 8 functions. It operates at 12 volts DC. $510.00 |
|
ALB Series Mini LED Light Bar |
|
| Pro LED Mini Light Bar Magnet Mounted Warning Light with Alternating Quad Flash Pattern with 240 High Output LEDs 16" L x 8" W x 6" H This light bar includes a magnet mount kit and 12' cable with a cigarette lighter adapter that will allow it to be moved quickly from vehicle to vehicle. For use in 12-volt DC electrical systems. $234.98 |
|
| Pro LED Mini Light Bar Permanent Mount Warning Light with Alternating Quad Flash Pattern with 240 High Output LEDs 16" L x 8" W x 5-1/2" H This light bar permanently installs with screws. For use in 12-volt DC electrical systems. $219.98 |
|
42SA Series Oval LED Strobe Lights |
||
| Pro LED 6" Oval Strobe Lights
with 22 High Output LEDs 42SA1 is the primary light, and 42SA2 is the secondary used when you need an alternating flash pattern. See "Choose your strobe pattern" for flash instructions before choosing your lights. $73.95 |
||
|
These six inch oval LED strobe lights are found on city, county and state vehicles including snow plows, pickups and tractors. They're also great for use on the construction site. Permanently sealed from the elements, these LED strobes can be mounted in any position, and there is no power supply to purchase. They operate on the 10 to 30 volts DC provided by your vehicle. Choose your strobe patternYou can choose from synchronous (flash together), alternating, or random strobe patterns, and there's no need for an external controller. It's all done through choosing your light combination and wiring. Full instructions are provided.
|
||
47SA Series Round LED Strobe Lights |
||
| Pro LED 4" Round Strobe Lights
with 36 High Output LEDs 47SA1 is the primary light, and 47SA2 is the secondary used when you need an alternating flash pattern. See "Choose your strobe pattern" above for flash instructions before choosing your lights. $69.95 |
||
53SA Series LED Strobe Lights |
||
| Pro LED 53SA Strobe Lights
with 6 High Output LEDs 53SA1 is the primary light, and 53SA2 is the secondary used when you need an alternating flash pattern. See "Choose your strobe pattern" above for flash instructions before choosing your lights. $54.75 |
||
65SA Series LED Strobe Lights |
||
| Pro LED 65SA Strobe Lights
with 3 High Output LEDs Looks like a standard 152Y marker light, but it's a really a strobe light! Note: Does not include a marker light function. 65SA1 is the primary light, and 65SA2 is the secondary used when you need an alternating flash pattern. See "Choose your strobe pattern" above for flash instructions before choosing your lights. $34.95 |
||
405SA Series LED Strobe Lights |
||
| Pro LED 5" x 2" 12 Function LED Strobe Lights
with 4 High Output LEDs 405SA1 is the Master (brain) light and controls the function of the 405SA2 Slave light. The 405SA2 Slave cannot be used separate from the 405SA1 Master. $89.99 each |
||
|
Permanently sealed from the elements, these LED strobes can be mounted in any position. They operate on the 10 to 30 volts DC provided by your vehicle. Choose your strobe patternYou can choose from 12 light patterns, and there's no need for an external controller. Simply touch the green Function Cycle wire of the 405SA1 Master light to ground through a momentary switch to move to the next light pattern. |
||
2500 Series LED Beacon |
|
| Pro LED Low Profile Quad Flash Pattern Pipe or Screw Mounted LED Beacon with 120 High Output LEDs 5" Inches Tall - This LED beacon can be mounted in a 1" pipe, with supplied screws on 6" centers, or with supplied studs on 5-1/4" centers. It can be used on any vehicle running 10-30 volts DC. $139.50 |
|
| Pro LED High Profile Quad Flash Pattern Pipe or Screw Mounted LED Beacon with 180 High Output LEDs 6-3/4" Inches Tall - This LED beacon can be mounted in a 1" pipe, with supplied screws on 6" centers, or with supplied studs on 5-1/4" centers. It can be used on any vehicle running 10-30 volts DC. $151.90 |
|
|
Pipe mount, screw mount, or stud mount - The 2500 series are our most versatile LED warning beacons yet. They're a perfect fit anywhere you need a full-size beacon, and of course, you'll end up saving yourself some change in the long run because there is no maintenance to be done - ever! |
|
500 Series LED Beacon |
|
| Pro LED Quad Flash Pattern Stud Mounted LED Beacon with 120 High Output LEDs This LED beacon has a rubber base with mounting studs on 4-1/8" centers. It can be used on any vehicle running 10-30 volts DC. $88.95 |
|
|
This beacon is a perfect LED upgrade from flash tube strobe lights such as the North American Signal ST500A, Peterson Mfg. 769A, and Truck-Lite 92530Y since it uses the same mounting pattern. We've done side by side comparisons with the ST500A and found the Pro LED 500Y to have a more brilliant flash pattern than the flash tube light. The 500Y beacon is 4-5/8" tall and the mounting base is 5-3/4" wide. The mounting studs are on 4-1/8" centers just like the lights it's meant to replace. |
|
| Pro LED Quad Flash Pattern Magnet Mounted LED Beacon with 120 High Output The 500YWM is 5-1/8" tall and the mounting base is 6-1/4" wide. This beacon includes a pre-installed magnet mount kit and 12' cable with a cigarette lighter adapter that will allow it to be moved quickly from vehicle to vehicle. Use this light on any system with 10-30 volts DC. $108.50 |
|
220 Series LED Beacon |
|
| Pro LED Quad Flash Pattern Screw Mounted Mini LED Beacon with 60 High Output LEDs This warning light includes a gasket, screws and wire pigtail for permanent installation on your vehicle. Use this light on any system with 10-30 volts DC. $64.95 |
|
| Pro LED Quad Flash Pattern Magnet Mount Mini LED Beacon with 60 High Output LEDs This warning light includes a magnet mount and 7' coiled cable with a cigarette lighter adapter that will allow it to be moved quickly from vehicle to vehicle. Use this light on any system with 10-30 volts DC. $69.95 |
|
|
These beacons are only 3-3/4" tall and the mounting base is 5-1/8" wide. The small size allows them to be used in a variety of applications. |
|
4621 Series LED Beacon |
|
| Pro LED Quad Flash Pattern Screw Mounted Mini LED Beacon This small LED beacon measures just 4.3" tall by 2.75 in diameter. It's meant for use on forklifts and other utility vehicles or in areas where you need to warn people of danger. This warning light includes a stainless steel screws and wire pigtail for permanent installation on your vehicle. Use this light on any system with 10-30 volts DC. $45.00 |
|
60 Series LED Beacon |
|
| Pro LED Quad Flash Pattern Stud Mounted Warning Light with 60 High Output LEDs This warning light includes a stud with nut and washers and a wire pigtail for permanent installation on your vehicle. Use this light on any system with 10-30 volts DC. $69.95 |
|
| Pro LED Quad Flash Pattern Magnet Mounted Warning Light with 60 High Output LEDs This warning light includes a magnet mount and 9' coiled cable with a cigarette lighter adapter that will allow it to be moved quickly from vehicle to vehicle. Use this light on any system with 10-30 volts DC. $69.95 |
|
|
The small footprint of these warning lights allows them to be used in a huge variety of applications such as garbage trucks, pickup trucks, dump trucks, fork lifts and construction equipment. Municipalities will find these lights perfect for everything from garbage trucks and dump trucks to lawn care equipment and snow plows. Overall, these warning lights are 5 inches tall and 4.75 inches wide. The lens measures 4.75 inches tall and 4 inches wide.
These Pro LED high output warning lights are ideal for use by municipalities, forestry fleets, or anyone wanting a durable low cost, long life warning light. The stud mounted lights can be installed in any position. |
|
Never replace a flash tube or motor again!
LED warning lights have no motors to burn out and no flash tubes with filaments that burn out.





























