Reflex Latch - The Reflex Latch automatically locks the rear rail when latched closed. The tonneau cover
opens easily by pulling the cord attached to the Reflex Latch.
|
|
Slide-Lock - Located at each rear corner. After the cover is secured in place by
the auto-latch, simply push to lock, pull to unlock. Also, by adding a tailgate lock, the cover & truck
bed can be secured.
|
Fast Clamp-On Installation - Uniquely designed and packaged for a fast and
easy clamp on installation. The clamps are specifically designed for the Access Tonneau Cover and the pickup
truck box it is being installed on.
EZ-Dial XT - The XT Tension Control lets you fine tune the cover tension in
seconds with the turn of the XT-Dial. XT gives you the tighest cover made.
No tools needed.
The roll-up bar, bows and cover easily roll out of the way to give you easy
entry into your truck bed. The Access Tonneau Cover stores close to the cab of your pickup with quick release
straps.
|
Access Tonneau Cover FAQ
- Can the Access tonneau cover stand up to tough winter weather?
- Yes, the Access tonneau cover is designed and built in North Dakota. Winters don't get much
colder or snowy than in the Dakotas. The commercial grade heavy duty reinforced vinyl tarp has
been proven to stay flexible at temperatures as low as -40°F.
- Can the Access cover be locked?
- The Access tonneau cover has a reflex latch on the driver's side that locks automatically when the
rear bar is latched. There is a manual slide-lock on the passenger side for extra security.
- Is the Access cover available in colors?
- No, the Access tonneau cover is only available in black.
- Can I install an Access cover and bed rails on my truck?
- Yes, Access tonneau covers install inside the truck's bed opening. No part of the cover rests
on top of the truck's bed rails. In fact, you can also install bed rail caps, most bedliners, and
stake pocket tie downs.
- Can the Access tonneau cover be used with an over-the-rail bedliner?
- Yes, but you will have to cut holes in the liner to allow for installation of the cover's mounting clamps.
- Will I need to find a professional installer?
- No, only a few hand tools are required for installation. If you can tighten a bolt, you can install an
Access tonneau cover. (Be sure to read and follow the instructions included with the cover.)
- Can Access tonneau covers be used with a tool box?
- There is the Access Tool Box Edition tonneau cover. It is custom made to fit trucks with
20"-21" wide tool boxes. The price is the same as the standard Access
Cover, and it can be ordered by calling us toll free at (866) 584-1084.
- Do you carry the Access Limited Edition?
- We don't stock it in our warehouse, but we can have one shipped directly from the manufacturer
to you. Call our toll free phone line for ordering information.
The Access Tonneau Cover is compatible with most bed accessories including bed rails.
|
